The iPV D3S is the new generation of small box mods from Pioneer4you. The iPV D3S follows on from the excellent D2 and D3. The D3S is now powered by the new 80 watt YiHi SX150H board that promises to offer class leading performance and consistency within such a small form factor. The iPV D3 now has improved temperature sensing for both Ni200 Nickel & Ti01 Titanium wire by lifting the power to 75 Joules.
The D3S can support lower resistance atomisers/builds and also introduces voltage 'step-down' support. This will allow the D3S to operate low resistance atomisers at low power levels. On top of this, the tough build quality of the D2 has continued, however, the D3S now has a noticeably more desirable finish thanks to some subtle design changes including a newly design battery compartment and a new attractive & durable paint finish.
- Output Power: 7W-80W
- Output Joule: 10J-75J
- Standard Resistance:0.15ohm-3.0ohm
- Joules Mode Resistance:0.05ohm-0.5ohm
- Output Voltage: 1.0V-7.0V(support step down)
- Input Voltage: 3.2V-4.5V
- Output Current: 1.0A-30.0A
- Input Current: 1.3A-35.0A
- Temp. limit Centigrade: 100°C-300°C
- Temp. limit Fahrenheit: 212°F-572°F
- Powered by YiHi SX150H
- Genuine Pioneer4you product
Click below to see it in action!